Guide

How to migrate from Mailchimp to SendPulse: contacts, unsubscribes, templates and automations

Updated Data checked September 30 – October 5, 2026Compiled by the Which Email Tool editorial teamSources ↓

How to migrate from Mailchimp to SendPulse

A move from Mailchimp to SendPulse takes six steps: export your Mailchimp account, import subscribed contacts, carry over unsubscribes, bring templates across, rebuild automations, and send the first campaign once SendPulse has activated the list. Keep Mailchimp running until the last step works, so nothing breaks while you switch.

  1. Export your account data from Mailchimp.
  2. Import the subscribed contacts into a SendPulse mailing list, with variables and tags.
  3. Suppress everyone who unsubscribed or bounced, using SendPulse’s unsubscribed list.
  4. Move templates as HTML, or rebuild them in the drag-and-drop builder.
  5. Rebuild automations in Automation 360.
  6. Activate the list with a first campaign, then repoint your signup forms and cancel Mailchimp.

Before you switch: what to check

Compare plans before you export anything. SendPulse Standard has no send cap and costs less than Mailchimp Essentials at every list size here; Mailchimp counts unsubscribed contacts toward its limit. Check what you would lose too: Mailchimp’s own Shopify integration and its 300+ listed integrations, against the handful SendPulse’s pricing page names.

Cheapest paid plan of each tool, regular price per month with monthly billing. The lowest price in each row is marked. Checked on official pricing pages, September 30 – October 5, 2026.
List sizeSendPulseStandardMailchimpEssentials
500 subscribers$12 $13
1,000 subscribers$18 $26.50
2,500 subscribers$38 $45
5,000 subscribers$52 $75
10,000 subscribers$78 $110
25,000 subscribers$159 $270
50,000 subscribers$281 $385
Emails includedunlimited emails10× contacts per month

Subscribed, unsubscribed and non-subscribed contacts all count toward the contact limit; archived, cleaned and deleted contacts do not.On paid plans, going over the contact limit or the send limit does not interrupt sending; an additional charge appears on the monthly bill.Mailchimp’s pricing table lists 300+ integrations on every plan.The email pricing page lists integrations with Make, Zapier, WordPress, Shopify and Creatio, plus an API and webhooks.

Write down your automations and the tools connected to Mailchimp now: forms on your site, a store, a CRM, Zapier. Each needs a new connection to SendPulse.

Step 1: Export contacts, unsubscribes and templates from Mailchimp

Mailchimp’s account export puts every contact group and your templates into one ZIP file. Subscribed, unsubscribed, non-subscribed and cleaned contacts arrive in separate files, which is what you need for the next two steps.

Mailchimp’s account export, available once every 24 hours from the Manage my data settings, is a ZIP file with separate audience files for subscribed, unsubscribed, non-subscribed and cleaned contacts, campaigns with their HTML and text, templates as HTML files, reports, stored images and files, SMS data, events and e-commerce data.

Mailchimp’s account export leaves out deleted audiences, billing receipts and the content of websites, landing pages and ads, and its list of exportable data does not mention automations.

Open the subscribed contacts file before you import it. Delete columns you will not use, note which ones hold names, phone numbers and dates, and check whether it has a tags column.

Step 2: Import contacts and tags into SendPulse

Create a mailing list in SendPulse and upload the subscribed contacts file. Match each column to a variable; a column you leave unmatched is not imported. SendPulse can tag every address in an upload, so you can upload one file per Mailchimp tag and assign that tag on import. Condition-based segments have to be rebuilt.

SendPulse adds contacts to a mailing list from a TXT, CSV, XLS or XLSX file, by copy and paste, or one at a time; each file column is matched to a variable, a column left unmatched is not uploaded, tags can be assigned to all imported addresses, and variables of contacts already in the list can be updated.

For a file import, SendPulse wants dates in MM/DD/YYYY format, phone numbers in international format and variables of up to 255 characters.Contacts can also be added to a SendPulse mailing list through its REST API, with tags passed in the same request.

Import only the subscribed file. Mailchimp’s non-subscribed contacts have not opted in to marketing email; leave them out of the marketing list.

Step 3: Carry over unsubscribed and cleaned contacts

Add Mailchimp’s unsubscribed and cleaned files to SendPulse’s unsubscribed list before your first campaign. Addresses on that list are excluded from further campaigns, so people who opted out of Mailchimp stay opted out.

Addresses can be added to SendPulse’s unsubscribed list one at a time, from a CSV, TXT, XLS or XLSX file, or by pasting up to 10,000 at once, and are then excluded from further campaigns.

Cleaned contacts are addresses Mailchimp no longer mails. Keeping them on the unsubscribed list stops the new platform from mailing them in its first campaigns.

Step 4: Move your templates

Mailchimp exports templates as HTML files, and SendPulse’s HTML editor accepts pasted code, so a template can be pasted in as HTML. You then edit it as code. If your team edits emails without touching HTML, rebuild the main templates in SendPulse’s drag-and-drop builder or start from one of its ready-made templates.

SendPulse templates are made in the drag-and-drop builder or by pasting code into the HTML editor, which the help center recommends only for people comfortable with HTML; a template made in the visual builder opens in the builder.The free email plan includes the drag-and-drop email builder and 140+ editable email templates.

Send yourself a test of every template before you use it. Replace Mailchimp’s merge tags with SendPulse variables, and re-upload images if they still point to Mailchimp’s servers.

Step 5: Rebuild your automations in Automation 360

Mailchimp’s list of exportable data does not include automations, so plan to recreate each flow by hand in Automation 360, SendPulse’s automation builder. Start with the flows that make money or answer signups, such as the welcome series and the abandoned cart email, and switch the Mailchimp versions off as each replacement goes live.

SendPulse’s help article builds a welcome series in Automation 360: the flow starts on the Add subscriber event for a chosen mailing list, the first email is the welcome email, and more emails can be added to the same flow.To start a flow from an event such as Abandoned cart, Automation 360 generates a URL and an example of the expected data, and the flow runs when your site sends the event to that URL.

Automation 360 flows by email plan: 5 on Free, 10 on Standard, 50 on Pro and unlimited on Enterprise, with 50, 70, 150 and unlimited elements per flow.Automation is the main difference between the plans besides price: flows of up to 4 steps on Essentials, up to 200 flows on Standard and Premium, none on Free.

A store on Shopify needs a separate look: SendPulse connects to Shopify through Zapier, while Mailchimp has its own integration.

SendPulse’s Shopify integration page describes a connection through Zapier that subscribes a customer after a new paid order.Mailchimp’s own Shopify integration syncs store data and triggers automations such as welcome, abandoned cart and back-in-stock emails.

Step 6: Activate the list and protect deliverability

SendPulse reviews where each new mailing list came from before its first campaign goes out, so plan for a short wait. Describe the source of the list honestly when asked, since the moderators can request more detail or block the campaign. Then send the first campaigns to your most engaged readers and widen the audience over a few sends.

SendPulse activates each new mailing list before mailing it: the first campaign to the list asks where the addresses came from and waits in moderation, moderators answer within 24 hours, may ask further questions by email, and can block the campaign if the source is not sufficient.

Once campaigns go out normally, point your website’s signup forms at SendPulse, reconnect the other tools on your list, and export a final Mailchimp backup before you close the account.

Is SendPulse cheaper than Mailchimp?

Yes, at every list size we track, and SendPulse Standard has no monthly send cap while Mailchimp Essentials includes ten times the plan’s contacts and bills extra sends. The free plans differ too: SendPulse’s holds more contacts and sends more emails a month than Mailchimp’s.

Cheapest paid plan of each tool, regular price per month with monthly billing. Sorted by price at 50,000 subscribers, the largest size shown; the lowest price in each column is marked. Checked on official pricing pages, September 30 – October 5, 2026.
ToolPlanPrice at 500 subscribersPrice at 1,000 subscribersPrice at 2,500 subscribersPrice at 5,000 subscribersPrice at 10,000 subscribersPrice at 25,000 subscribersPrice at 50,000 subscribersEmails included
SendPulseUnlimited emailsStandard$12 $18 $38 $52 $78 $159 $281 unlimited emails
MailchimpEssentials$13 $26.50 $45 $75 $110 $270 $385 10× contacts per month
Notes on these prices (1)
  • Mailchimp. These are regular prices. The 1,000 row uses the 501–1,500 tier, so a list of up to 1,500 pays that price.
Free plan limits as published by each vendor, sorted by emails a month. Checked September 30, 2026.
ToolSubscriber limitEmailsVendor branding in emailsNotes
SendPulse50015,000 / monthYes5 automation flows, 3 sender addresses
Mailchimp250500 / monthYesalso capped at 250 sends a day

SendPulse

Where you are moving to
At 1,000 subscribers
$18/moStandard
At 5,000 subscribers
$52/moStandard
At 10,000 subscribers
$78/moStandard
Emails on Standard
unlimited emails
Free plan
500 contacts, 15,000 emails/month

SendPulse Standard costs less than Mailchimp Essentials at every size here, sends unlimited emails, and adds SMS and chatbots for WhatsApp, Telegram, Instagram and Messenger in the same account.

The move has real costs. Automations must be rebuilt by hand, an imported Mailchimp template is edited as code unless you rebuild it in the builder, a new list waits for SendPulse’s review before its first campaign, SendPulse’s Shopify integration page describes a Zapier connection rather than a native sync like Mailchimp’s, dynamic segments start on the Pro plan, and Standard allows 10 automation flows, against up to 200 on Mailchimp Standard.

Standard includes static segmentation; dynamic segmentation with saved segments starts on Pro.Automation 360 events, the custom triggers your site or store sends in, by email plan: 1 on Free, 10 on Standard, 50 on Pro and unlimited on Enterprise.

Strong points

  • Email, SMS and chatbots for WhatsApp, Telegram, Instagram and Messenger run from one account
  • Standard plan includes unlimited emails at every list size
  • Separate free tiers for SMTP, chatbots and the course builder

Limits

  • Free plan stops at 500 subscribers and keeps SendPulse branding in emails
  • Pay-as-you-go email credits expire after 12 months
  • SMS is billed per message on top of the plan; none is bundled
  • Chatbots beyond the free allowance are a separate paid plan
  • A dedicated IP is listed only for the SMTP Pro and Enterprise plans

SendPulse pricing page ↗

Mailchimp

What you are leaving
At 1,000 subscribers
$26.50/moEssentials
At 5,000 subscribers
$75/moEssentials
At 10,000 subscribers
$110/moEssentials
Emails on Essentials
10× contacts per month
Free plan
250 contacts, 500 emails/month

Mailchimp Essentials costs more at every size and bills sends beyond ten times the plan’s contacts, but it lists 300+ integrations and has its own Shopify and WooCommerce integrations.

Strong points

  • Large directory of third-party integrations
  • Pay-as-you-go email credits are available

Limits

  • Free plan is capped at 250 contacts and 500 emails a month
  • Essentials includes 10× your contact count in sends a month; sends over that are billed extra

Mailchimp pricing page ↗

When to stay on Mailchimp instead

  • SendPulseYou want a lower bill and unlimited sends, mail your whole list more than ten times a month, or want SMS and messenger chatbots next to email, and can rebuild your automations.
  • MailchimpYour store or another key tool connects only to Mailchimp, or you run more automation flows than SendPulse Standard allows, or so many that rebuilding them costs more than the price difference.

Frequently asked questions

How do I migrate from Mailchimp to SendPulse?

Export your account data from Mailchimp’s Manage my data settings. Create a mailing list in SendPulse and upload the subscribed contacts file, matching each column to a variable. Add the unsubscribed and cleaned contacts to SendPulse’s unsubscribed list, bring templates over as HTML or rebuild them, recreate automations in Automation 360, then send a first campaign and let SendPulse activate the list.

How do I export contacts and unsubscribes from Mailchimp?

Mailchimp’s account export, available once every 24 hours, is a ZIP file with separate files for subscribed, unsubscribed, non-subscribed and cleaned contacts. Open the subscribed file before you import it and check whether it has a tags column. SendPulse can assign a tag to every address in one upload, so you can upload one file per Mailchimp tag; condition-based segments have to be rebuilt.

Can I move my Mailchimp templates and automations to SendPulse?

Templates, as code: Mailchimp exports them as HTML files, and they can be pasted into SendPulse’s HTML editor. To edit them block by block, rebuild them in the drag-and-drop builder. Mailchimp’s list of exportable data does not include automations, so plan to recreate each flow in Automation 360.

Will switching from Mailchimp hurt deliverability?

It can if you import addresses that never opted in or have not opened in a long time. Import only subscribed contacts, keep the unsubscribed and cleaned files on SendPulse’s unsubscribed list, and send the first campaigns to your most engaged readers. SendPulse also reviews where each new list came from before the first campaign goes out.

Is SendPulse cheaper than Mailchimp?

Yes, at every list size we track. With monthly billing SendPulse Standard costs $18 at 1,000 subscribers and $78 at 10,000, with unlimited emails; Mailchimp Essentials costs $26.50 and $110, includes ten times the plan’s contacts in monthly sends and bills sends beyond that. SendPulse’s free plan also holds more contacts.

Sources

Every price and limit on this page comes from the vendor’s own public pages. How we choose and check.

Not sure where to start?

Put in your list size and see what each tool would charge you this month.

Open the calculatorHow we choose